Some Cool Title
In the course of the project for the condom testing device, the interface panel was changed and revised several times.
The following videos show the function of the interface panel of the condom test device.
Designing and building a user interface board for a condom testing device
Project Details
- Category : Research-Industrial Project
- Date : 2020
- Related project 1 : Test device for very thin condoms
- Related project 2 : PCB design for Monitoring Board
- Related project 3 : Control Unit Header
- Related project 4 : Control Unit V1.0
- Related project 5 : Control Unit V2.0
- Related project 6 : Control Unit V2.1 Download Title
In this project, an interface monitoring board for the condom testing device was designed and built. This monitoring board functions as the user interface (UI) of the device and, in addition to displaying various device parameters, can also send operator commands to the central control system. In condom manufacturing factories, it is necessary to test condoms for the absence of holes after initial production. This test is carried out with an electronic testing device or ET. The basis of this device is to create a high-voltage circuit. If the condom has a hole, a short circuit occurs in the circuit and the device rejects the condom.
The interface board is in direct contact with the device controller and displays the most important parameters of the device at all times.
Below you can see photos of this interface board in the research and development phase.
