Intelligent balance of the rotating system using electromechanical actuators

In this project we have a rotating system that is unbalanced and has strong vibrations. This system has 4 electromechanical actuators and can intelligently balance the system ...

Development and production of an electric car for 4 passengers

The main objective of this project was to introduce a production line for light and semi-light electric vehicles for urban use. As part of this project, an electric car ...

PCB design and programming of the control unit for testing sanitary condoms V2.1

In this project, the PCB design and electronic board schematics of the control unit for testing condoms were created. In addition, the programming of this PCB was carried out in ...

Design and manufacture of a sugar cane transporter

The main objective of this project is to set up a production line for sugar cane transporters for agricultural and industrial companies operating in the sugar industry. In a first step, a ...

Subsection of programming in the smart balance project of the rotating system

The main part of the programming of the Smart Balance project of the rotation system was written with the QT Framework in the C++ language The control system in this project is designed ...

Design and construction of an innovative testing device for very thin condoms using carbon fiber probes

In this project, a device for testing sanitary condoms was designed and built with the creative idea of using carbon fiber probes. In condom production lines, one of the problems ...

CAD design for the construction of a 2-seater electric car project

This project presents the CAD design of the 2-seater electric car. In the electric car industry, parameters such as the optimal weight of the vehicle play a very important role ...

Design and manufacture of a control header board for the control system of a condom testing machine

This control board based on the ARM-NXP LPC1788 microprocessor was developed and built for the control system of sanitary condom testing machine. Since the condom testing machine ...

CAD design of an index gearbox for a condom testing machine

This design is based on the Geneva mechanism, so that an index gearbox can be made from it. Index gearboxes are widely used in production lines and industrial machinery. In the project ...

The use of radial electromagnetic actuators in the intelligent balance of a rotating system

In this project we have a rotating system that is unbalanced and does not vibrate so much. This system has 4 radial electromagnetic actuators and can intelligently determine the exact ...

CAD design and engineering analyzes for the design and construction of an axle unit for sugar cane transporters

In this project, CAD design and CAE analyzes were carried out for the axle unit of the sugar cane transporter. Due to the high sensitivity of this unit, various static and dynamic analyzes ...

Design and manufacture of a 3.5 kV high pot device for the sanitary condom tester project V3.0

In condom manufacturing factories, it is necessary to test condoms for the absence of holes after initial production. This test is carried out with an electronic testing device ...

Design and development of a central control system for the testing sanitary condoms v2.1

This control unit is used in the test device for condoms. In this device there are many mechanical, electromechanical and pneumatic systems that must harmonize ...

Design and Development of a Dual-Mode Autonomous/Manual Floor Scrubber Robot

One of the issues that arises in buildings, particularly high-rise buildings, is the cleaning of floor surfaces. In this project ...

The use of diagonal electromagnetic actuators in the intelligent balance of a rotating system

In this project, an attempt was made to balance the rotating system, which has an imbalance, using a series of electromagnetic actuators. In this project, the actuators are arranged diagonally ...

Rotary mechanism with three different voltage zones for testing sanitary condoms V2.2

This mechanism is used to test different types of sanitary condoms in terms of condom thickness. In the condom industry, especially in the production of condoms ...

PCB design and programming of 5 kV high pot device for the sanitary condom tester project V2.0

In this project, the PCB design and electronic board schematics of the 5 kV high pot devices were created. The programming of this PCB was also carried out in the C/C++ language in the ...

Design and construction of a 2-seater electric car

The main objective of this project was to introduce a production line for light and semi-light electric vehicles for urban use. As part of this project, an electric car ...

PCB design and programming of the control header board for the control system of the condom testing machine

In this project, the PCB design and electronic board schematics of the control header board for the control system of the condom testing machine were created. In addition, the programming ...

Design and manufacture of an index gearbox for a condom testing machine

Index gearboxes are widely used in production lines and industrial machinery. In the project of designing and manufacturing sanitary condom testing device, it is necessary to place ...

Design and manufacture of 5 kV high pot device for the sanitary condom tester project V2.0

In condom manufacturing factories, it is necessary to test condoms for the absence of holes after initial production. This test is carried out with an electronic testing device ...

Design and Implementation of a Continuous Aluminum Ingot Casting Line

This project constitutes a key phase in the comprehensive upgrade and optimization scheme for the Cast House of a facility specializing in aluminum profile production. The ...

PCB design and programming of 2 kV high pot device for the sanitary condom tester project V1.0

In this project, the PCB design and electronic board schematics of the 2 kV high pot devices were created. The programming of this PCB was also carried out in the C/C++ language in the ...

CAD design and mechanical design of the rotating system intelligent balance project

In this sub-project, the CAD and mechanical design of the Smart Balance project for the rotating system was created. The design was created for ...

Smart Vending Machine: Design & Implementation with Remote Telemetry

This project was commissioned by a private company active in the field of automatic vending machines. The initial objective was to design and build smart vending machines capable ...

The mechanism of separation of tested condoms in the sanitary condom testing machine V1.1

Once the condoms have been tested in the condom testing machine and the condom rolling process has been completed, it is necessary to separate the condoms based on their test ...

CAD design for the construction of a 4-seater electric car project

This project presents the CAD design of the 4-seater electric car. In the electric car industry, parameters such as the optimal weight of the vehicle play a very important role ...

CAE analyzes for the design and construction project of a sugar cane transporter

In the engineering design phase of the project for the design and construction of the sugar cane transporter, after designing the different components of the device, several ...

Design and construction of the control system for high pot 3.5 kV version 3.0 projects (Device for testing sanitary condoms)

In condom manufacturing factories, it is necessary to test condoms for the absence of holes after initial production. This test is carried out with an electronic testing device ...

CAD design of the project to build an innovative design for a condom testing device for very thin condoms using carbon fiber probes

This design was made to make a test device for sanitary condoms. In this project, a device for testing sanitary condoms was designed and built with the creative idea of using carbon ...

Design and construction of a nostalgic 4-seater electric car

This project was planned on the basis of a customer's request to start a production line for nostalgic electric cars. First, a prototype of this type of car was designed and built and ...

PCB design and programming of the control unit for testing condoms V2.0

In this project, the PCB design and electronic board schematics of the control unit for testing condoms were created. In addition, the programming of this PCB was carried out in the C/C++ language in the ...

Electronic sub-section and control system of the rotating system intelligent balance project

There are a number of drivers and controllers in the control and electronics section of the rotating system smart balance project. In general, the drivers used in this project are used to ...

CAD design of a rotating mechanism with three different voltage zones for testing sanitary condoms V2.2

This design was done for the mechanism of testing different types of sanitary condoms in terms of the thickness of the condom. In the condom industry, especially in the production ...

Design and manufacture of sugar cane transporter axles

As part of the project to set up a production line for sugar cane transportation machines, it was initially decided to buy the axle unit of the machine as a ready-made package from ...

CAD design of a roll collection mechanism for testing of sanitary condoms

This design is used for the roller collection mechanism used in the project to develop and manufacture a test device for condoms. This mechanism ...

Design and manufacture of a 12.5 kV high pot device for the sanitary condom tester project V5.1

In condom manufacturing factories, it is necessary to test condoms for the absence of holes after initial production. This test is carried out with an electronic testing ...

Structural modification and stress analysis of fixtures used in a dryer in an livestock feed factory

One of the economic sectors associated with the sugar cane industry is the production of animal feed for livestock farming. Normally, in a sugarcane-based industry, there is ...

CAD design of a nostalgic 2-seater electric car

This section presents the CAD design and CAE analyzes of the design and construction project of a 2-seater nostalgic electric car. This project was planned on the basis of a customer's request ...

CAD draft for the design and construction of a sugar cane transporter

In the engineering design phase of the project for the design and construction of the sugar cane transporter, various parts of the machine were carefully designed. This device consists of ...

PCB design and programming of the control unit for testing sanitary condoms V1.0

In this project, the PCB design and electronic board schematics of the control unit for testing condoms were created. In addition, the programming of this board was carried out ...

Rotary mechanism with three different voltage zones for testing sanitary condoms V1.2

This mechanism is used to test different types of sanitary condoms in terms of condom thickness. In the condom industry, especially in the production of condoms ...

Design and manufacture of 2 kV high pot device for the sanitary condom tester project V1.0

In condom manufacturing factories, it is necessary to test condoms for the absence of holes after initial production. This test is carried out with an electronic testing ...

CAD design of a 2-seater electric pickup

This project presents the CAD design of the 2-seater electric pickup. In the electric car industry, parameters such as the optimal weight of the vehicle play a very important role ...

PCB design and programming of the control system for the high pot system 3.5 kV version 3.0 (condom test device)

In this project, the PCB design and the schematic of the electronic board of the control system of the 3.5 kV high-voltage part for the sanitary condom test device were designed. The programming of this PCB was also carried out in the C/C++ language in the Keil µVision software programming environment.

Design and development of a central control system for the testing of condoms v2.0

This control unit is used in the test device for condoms. In this device there are many mechanical, electromechanical and pneumatic systems that must harmonize with ...

CAD design of a rotating mechanism with three different voltage zones for testing sanitary condoms V1.3

This design was done for the mechanism of testing different types of sanitary condoms in terms of the thickness of the condom. In the condom industry, especially in the production ...

Design and construction of a nostalgic 2-seater electric car

This project was planned on the basis of a customer's request to start a production line for nostalgic electric cars. First, a prototype of this type of car was designed and built and ...

Roll collection mechanism for testing of sanitary condoms

This mechanism is used to roll the condoms to be tested in the condom testing device. This mechanism has two pneumatic jacks. In the condom testing machine, the condoms ...

PCB design and programming of a 3.5 kV high pot device for the sanitary condom tester project V3.0

In this project, the PCB design and electronic board schematics of the 3.5 kV high pot devices were created. The programming of this PCB was also carried out in the C/C++ language in the ...

Rotary mechanism with three different voltage zones for testing sanitary condoms V1.3

This mechanism is used to test different types of sanitary condoms in terms of condom thickness. In the condom industry, especially in the production of condoms ...

PCB design of 12.5 a kV high pot device for the sanitary condom tester project V5.1

In this project, PCB design and electronic board schematics of 12.5 kV high pot device has been done. In condom manufacturing factories, it ...

CAD design of the mechanism for separating tested condoms in the sanitary condom testing machine V2.1

This design is used for the mechanism for separating the tested condoms in the condom testing machine. After completing the condom testing ...

Rotary mechanism with three different voltage zones for testing sanitary condoms V2.1

This mechanism is used to test different types of sanitary condoms in terms of condom thickness. In the condom industry, especially in the production of condoms ...

PCB design and programming of a 4 kV high pot device for the sanitary condom tester project V4.0

In this project, the PCB design and electronic board schematics of the 4 kV high pot devices were created. The programming of this PCB was also carried out in the ...

The mechanism of separation of tested condoms in the sanitary condom testing machine V2.1

After completing the condom testing in the condom testing machine and after completing the condom rolling process, it is necessary to separate the condoms based on their test ...

Design and construction of the control unit for testing sanitary condoms V1.0

This control unit is used in the test device for condoms. In this device there are many mechanical, electromechanical and pneumatic systems that must harmonize with ...

Design and manufacture of a 12.5 kV high pot device for the sanitary condom tester project V5.0

In condom manufacturing factories, it is necessary to test condoms for the absence of holes after initial production. This test is carried out with an electronic testing ...

CAD design of a rotating mechanism with three different voltage zones for testing sanitary condoms V2.1

This design was done for the mechanism of testing different types of sanitary condoms in terms of the thickness of the condom. In the condom industry, especially in the production ...

Designing and building a user interface board for a condom testing device

In this project, an interface monitoring board for the condom testing device was designed and built. This monitoring board functions as the user interface (UI) of the device ...

PCB design of a 12.5 kV high pot device for the sanitary condom tester project V5.0

In this project, PCB design and electronic board schematics of 12.5 kV high pot device has been done. In condom manufacturing factories, it ...

Rotary mechanism with three different voltage zones for testing sanitary condoms V1.1

This mechanism is used to test different types of sanitary condoms in terms of condom thickness. In the condom industry, especially in the production of condoms by dipping them in latex ...

CAD design of the mechanism for separating tested condoms in the sanitary condom testing machine V1.1

This design is used for the mechanism for separating the tested condoms in the condom testing machine. Once the condoms have been tested in the condom testing ...

CAD design of a rotating mechanism with three different voltage zones for testing sanitary condoms V1.2

This design was done for the mechanism of testing different types of sanitary condoms in terms of the thickness of the condom. In the condom manufacturing industry, especially ...

PCB design of a user interface board for sanitary condom testing device

In this project, the PCB design and electronic board schematics of the user interface for the test device for condoms were created. An interface monitoring board was designed and built ....

Design and Fabrication of a Fixture for a Kawasaki Welding Robot

In this project, a fixture assembly was designed and fabricated specifically for a Kawasaki robotic arm. This fixture is capable of accurately positioning ...

CAD design of a rotating mechanism with three different voltage zones for testing condoms V1.1

This design was done for the mechanism of testing different types of sanitary condoms in terms of the thickness of the condom. In the condom industry, especially in the ...

Design and manufacture of a 4 kV high pot device for the sanitary condom tester project V4.0

In condom manufacturing factories, it is necessary to test condoms for the absence of holes after initial production. This test is carried out with an electronic testing device ...

An Innovative Quasi-Continuous Power Transmission System

This idea, which has also been patented, is related to an innovative design of continuously variable transmissions. The main idea of ​​this project is taken from the new generation ...

Design and construction of a laboratory gyroscope for wind turbines

In this project, a simplified gyroscope model was designed and built for use in wind turbines. The central control and data logger system used in this project was designed ...

Production of plastic injection molds

These injection molds refer to the smart vending machine project. In this project, a simple and cheap system was needed for the movement of goods. Due to the limitations, ...

Earthquake Accelerations Simulator Device (Shaking Table) by using Electromagnetic Forces

Innovative Quasi Continuous Power Transmission System - Automatic Gearbox with Capability of Regulation of Gears Connection According to Required Torque and Velocity

Intelligent Security System for Locating People at Buildings by using Power Line Communications

Intelligent System for Locating People in Earthquake Situations by using Power Line Communications

Earthquake Accelerations Simulator Device (Shaking Table) by using Electromagnetic Forces based on Revolution Control of Electrical Motor

Innovative Solution for Reducing of Liquefaction Risk by using Injection of Expandable Resins

Definition of Surface and Internal Failures of Rail through Ultrasound Non-contact System

Intelligent System for Controlling Energy Consumption at Constructions by using Power Line Communications

Earthquake Accelerations Simulator Device (Shaking Table) by using Electromagnetic Forces based on Revolution Control of Electrical Motor and Linear Movement of Concentrated Mass

Intelligent System for Locating Fire at Residential Buildings and Administrative Units by using Power Line Communications